The Benefits of Using the BMW Scanner 1.4.0 Full Version for Your Vehicle
BMW Scanner 1.4.0 Full Version: A Powerful Diagnostic and Coding Tool for Your BMW
If you own a BMW and want to diagnose, code, program, or customize your car, you need a reliable and easy-to-use tool that can access all the modules and features of your vehicle. One such tool is the BMW Scanner 1.4.0 Full Version, also known as PA Soft or Car Soft.
bmw scanner 1.4.0 full version
This tool is a USB device that connects to your car's OBD port and communicates with your laptop via a software program. It works with most BMW models from 1996 to 2004, including E38, E39, E46, E53, E83, and E85.
What Can You Do with the BMW Scanner 1.4.0 Full Version?
The BMW Scanner 1.4.0 Full Version can perform a variety of functions, such as:
Diagnostics: You can read and clear fault codes from all the modules in your car, such as DME, EWS, SRS, ABS, etc. You can also view real-time data and status of all the sensors and actuators.
Mileage correction: You can adjust the odometer value in your instrument cluster and other modules that store mileage data.
Adaptation: You can reset or change various settings and parameters in your car, such as service intervals, oil level sensor, throttle adaptation, etc.
Programming: You can update or modify the software or firmware of your modules, such as DME, EWS, LCM, etc.
Coding: You can enable or disable various features and functions in your car, such as daytime running lights, auto-locking doors, welcome lights, etc.
Encoding: You can copy or transfer the ZCS (IKE-EWS) and FA (IKE-LCM) codes from one module to another.
How to Install and Use the BMW Scanner 1.4.0 Full Version?
To install and use the BMW Scanner 1.4.0 Full Version, you need a laptop with Windows operating system (preferably Windows 10) and a USB port. You also need to download and install the software and drivers for the device from a reliable source.
Here are the steps to install and use the BMW Scanner 1.4.0 Full Version:
Unzip the downloaded file and run the setup.exe file to install the software.
Right-click on the ftdibus.inf and ftdiport.inf files in the scanner driver folder and select "install" from the menu.
Plug in the scanner device to your car's OBD port and then connect it to your laptop via USB cable.
Run the BMW Scanner software and wait for it to recognize the device and the car.
Select the module you want to access from the main menu and follow the instructions on the screen.
Note: If you have an older BMW model with a round 20-pin diagnostic port under the hood, you will need an additional adapter to connect it to the scanner device.
Where to Buy the BMW Scanner 1.4.0 Full Version?
The BMW Scanner 1.4.0 Full Version is a popular and affordable tool for BMW enthusiasts and professionals. You can buy it online from various websites that sell car diagnostic tools and accessories.
However, you need to be careful when buying this tool online as there are many fake or low-quality products that may not work properly or damage your car. You should always buy from a reputable seller that offers good customer service and warranty.
One of the websites that sells genuine and high-quality BMW Scanner 1.4.0 Full Version is German Audio Tech (https://www.germanaudiotech.com/). They offer free shipping within USA and a lifetime warranty for their products. They also provide technical support and installation guides for their customers.
What Are the Advantages of the BMW Scanner 1.4.0 Full Version?
The BMW Scanner 1.4.0 Full Version has many advantages over other diagnostic and coding tools for BMW cars. Some of these advantages are:
It is compatible with Windows 10 and does not require disabling driver signature check or test mode.
It has a simple and user-friendly interface that allows you to access all the functions easily.
It supports multiple languages, such as English, German, French, Spanish, etc.
It is affordable and offers a lifetime warranty and technical support from the seller.
It can perform advanced functions that other tools cannot, such as encoding ZCS and FA codes, reading EWS-DME synchronization code, etc.
What Are the Disadvantages of the BMW Scanner 1.4.0 Full Version?
The BMW Scanner 1.4.0 Full Version is not a perfect tool and has some disadvantages that you should be aware of before buying it. Some of these disadvantages are:
It is not compatible with some newer BMW models after 2004, such as E90, E60, E70, etc.
It may not work properly with some modules or features in your car, depending on the software version and configuration.
It may require an additional adapter for older BMW models with a round 20-pin diagnostic port.
It may not be updated frequently or have the latest software or firmware for your modules.
It may be a fake or low-quality product if you buy it from an unreliable seller or website.
What Are the Customer Reviews of the BMW Scanner 1.4.0 Full Version?
The BMW Scanner 1.4.0 Full Version has received many positive reviews from customers who have used it for their BMW cars. Here are some examples of customer reviews from different websites:
"I bought this scanner to code some features on my E46 and it worked great. It was easy to install and use and it did everything I wanted it to do. I was able to turn off DRLs, enable convenience closing, change language, etc. It also read and cleared fault codes from all the modules. I highly recommend this scanner for anyone who wants to customize their BMW." - Amazon.com
"This scanner is a must-have for every BMW owner. It is very durable and works flawlessly with my E39 and E53. It can access all the modules and features in my cars and perform various functions such as diagnostics, adaptation, programming, coding, etc. It also has a nice screen and supports multiple languages. It is much better than other scanners I have tried before." - BimmerFest.com
"I am very happy with this scanner. It is compatible with Windows 10 and does not require any complicated steps to install or use it. It can do everything I need it to do for my E38 and E85. It can read and clear codes, view real-time data, reset service lights, adjust mileage, etc. It also has a good customer service and warranty from the seller." - OBDPlanet.com
How to Troubleshoot the BMW Scanner 1.4.0 Full Version?
The BMW Scanner 1.4.0 Full Version is a reliable and easy-to-use tool, but sometimes it may encounter some problems or errors that prevent it from working properly. Here are some common issues and solutions that you may face when using this tool:
Drivers are not installed: This means that the drivers for the device are not installed correctly or are outdated. You need to uninstall any previous drivers using the CDMUninstaller.exe file and then install the latest drivers from a reliable source.
Hardware fault: This means that the device is not connected properly or is defective. You need to check the connection of the device to the car and the laptop and make sure it is secure and clean. You may also need to replace the device if it is damaged or faulty.
Connection error with IKE or EWS: This means that there is a communication problem between the device and the modules in your car. You need to check the software version and configuration of your modules and make sure they are compatible with the device. You may also need to update or modify the software or firmware of your modules using the programming function.
No response from DME: This means that the device cannot access the engine control module in your car. You need to check if your car has a round 20-pin diagnostic port under the hood and use an additional adapter to connect it to the device.
Module not supported: This means that the device cannot access or perform certain functions on some modules in your car. You need to check if your car model and year are supported by the device and if the module has the latest software or firmware version.
How to Update the BMW Scanner 1.4.0 Full Version?
The BMW Scanner 1.4.0 Full Version is a powerful tool that can update or modify the software or firmware of your modules using the programming function. However, you need to be careful when using this function as it may cause damage or malfunction to your modules if done incorrectly.
Here are the steps to update the BMW Scanner 1.4.0 Full Version:
Download and save the latest software or firmware files for your modules from a reliable source.
Select the module you want to update from the main menu and click on Programming.
Select Read Program Memory and save it as a backup file in case something goes wrong.
Select Write Program Memory and choose the file you downloaded for your module.
Wait for the process to complete and verify that everything works fine.
Note: You should always backup your original files before updating or modifying them. You should also only use files that are compatible with your module and device.
How to Compare the BMW Scanner 1.4.0 Full Version with Other Tools?
The BMW Scanner 1.4.0 Full Version is one of the many tools available for diagnosing and coding BMW cars. However, it may not be the best or the only tool for your needs. You may want to compare it with other tools and see which one suits you better.
Here are some factors to consider when comparing the BMW Scanner 1.4.0 Full Version with other tools:
Compatibility: You need to check if the tool is compatible with your car model and year, as well as with your computer operating system and USB port.
Functionality: You need to check what functions the tool can perform on your car, such as diagnostics, coding, programming, adaptation, etc.
Usability: You need to check how easy and user-friendly the tool is to install and use, as well as how reliable and accurate it is.
Price: You need to check how much the tool costs and if it offers good value for money.
Support: You need to check if the tool has good customer service and warranty from the seller, as well as technical support and updates from the manufacturer.
What Are Some Alternatives to the BMW Scanner 1.4.0 Full Version?
The BMW Scanner 1.4.0 Full Version is not the only tool that can diagnose and code BMW cars. There are other tools that may offer different or better features and functions for your car. Here are some examples of alternative tools:
INPA: This is a software program that works with a K+DCAN cable or interface to access various modules and features in your car. It can perform diagnostics, coding, programming, adaptation, etc. It is compatible with most BMW models from 1998 to 2013.
Carly: This is a mobile app that works with a Bluetooth adapter or dongle to connect to your car's OBD port. It can perform diagnostics, coding, customization, service reset, etc. It is compatible with most BMW models from 1996 onwards.
Foxwell NT510: This is a handheld device that plugs into your car's OBD port and has a built-in screen and buttons. It can perform diagnostics, coding, service reset, battery registration, etc. It is compatible with most BMW models from 1987 onwards.
AUTOPHIX 7910: This is another handheld device that plugs into your car's OBD port and has a built-in screen and buttons. It can perform diagnostics, coding, service reset, battery registration, ABS bleeding, SAS calibration, etc. It is compatible with most BMW models from 1996 onwards.
Conclusion
The BMW Scanner 1.4.0 Full Version is a powerful and affordable tool that can diagnose and code most BMW models from 1996 to 2004. It has many advantages, such as compatibility with Windows 10, simple and user-friendly interface, multiple languages support, lifetime warranty and technical support, and advanced functions. However, it also has some disadvantages, such as limited compatibility with newer BMW models, possible errors or problems with some modules or features, need for an additional adapter for older BMW models, lack of frequent updates, and risk of fake or low-quality products.
Therefore, before buying this tool, you should compare it with other tools and see which one suits your needs better. You should also buy it from a reputable seller or website that offers good customer service and warranty. You should also be careful when using this tool and follow the instructions and precautions carefully.
The BMW Scanner 1.4.0 Full Version is a great tool for BMW enthusiasts and professionals who want to customize and enhance their driving experience. However, it is not a perfect tool and may not be the best or the only tool for your car. You should always do your research and make an informed decision before buying or using any tool for your car. b99f773239
https://www.mentivirtuose.com/group/mysite-200-group/discussion/43210073-3ad8-4e8e-96d1-334d02a13200